Version	Date	Description
0	2020-09-30	3D model Geometry and mesh in Salome - CFd in openFoam

In this documentation you can obtain basis for: - 3D Meshing. - Turbulence and lagrangian fluid modeling. - Overset modeling.

PY-A966 Overset Hydrocyclone

Last model

There were made some previous tests in order to obtain an usefull model. There were tested differente kind of meshes:

• Salome wedge mesh with divisions in order to obtain a mapped mesh.

• Snappyhexmesh meshes in order to obtain enouhg divisions on boundaries.

The specific scope is to obtain two geometric objects, one corresponding to the free zone and the other to the overset. The model finally used was meshed mapping meshes with salome.

Salome model

• Geometry and mesh all and cylinder

OpenFoam - steps

• Snappyhexmesh Cyclon overset construction
  • surfaceFeatureExtract dictionary
• Tests - Creating Geometry and Mesh
• Use on OpenFOAM
  • openFoam Flies
  • Actions
• paraFaom postprocessing
• Dynamic Model
• Overset Meshing
• Geometry and background mesh for snappyhexmesh

Pruebas

## .. toctree:: ## :maxdepth: 2

## PY-A966-results